all words
   any words
   exact phrase
November 17, 2017
  All Categories  >  Asphalt Binder Testing (+Superpave)  >  Viscosity/Rheology
 
   
 
  Product Information
 
 
Saybolt Viscosity Baths with Automatic Timing Option
Model: See Models Listed
Price: See Prices Listed
Condition: New
Availability: Inquire
   
 
 
  Accessories
   Product Model # Price   Sale Price Qty
 Automatic Saybolt Viscosity Timing Sensor   BTVR-13A1   $1,985.00      
 Silicone Heat Transfer Fluid, One Gallon Container   BTVR-13A2   $225.00      
  Other Models
   Product Model # Price   Sale Price Qty
 SV3000 Saybolt Viscosity Baths (no timing sensor)   BTVR-13   $5,490.00   $5,280.00    
 SV3000 Saybolt Viscosity Baths w/Automatic Timing Option, 220-240V, 50/60Hz   BTVR-13F   $5,295.00      
 SV4000 Saybolt Viscosity Baths w/Automatic Timing Option & Acessories for Timing Sensors, 220-240V, 50/60Hz   BTVR-14F   $6,500.00      
 SV4000 Saybolt Viscosity Baths w/Automatic Timing Sensor Option   BTVR-14   $6,185.00      
 
 
  Description
  Two different Models of Sabolt Viscosity Baths are offered in either domestic or foreign voltage. The SV4000/BTVR-14 and SV/4000/BTVR-14F includes power supply board, cable, and wiring harness for user or factory installation of up to four (4) BTVR-13A1 Automatic Saybolt Viscosity Timing Sensors.

Constant temperature Saybolt Viscosity Bath with available automatic timing feature for viscosity determinations using Saybolt viscometer tubes and orifices. Microprocessor PID circuitry assures precise temperature control within ASTM specified tolerances throughout the operating range of the bath. Simple push-button controls and dual digital displays permit easy setting and monitoring of bath temperature. Two place calibration offset is provided. This bath accommodates four viscometers and four 60mL receiving flasks. Sliding draft shields and a chemical-resistant alignment plate facilitate handling of the flasks, and glare-free fluorescent backlighting is provided for easy viewing of the samples. Communications software (RS232, etc.) ramp-to-set, and other enhanced features are available at additional cost

At the push of a button, the automatic timer starts the sample flow, senses the 60mL end point, and digitally records and displays the efflux time in 0.1 seconds resolution with an accuracy of 0.05%. Automatic timing improves testing accuracy and convenience, eliminating the chain and cork assembly and the need to manually time each sample. Timer installation is available in any configuration from one to four tubes.

Insulated bath interior is constructed entirely of heavy gauge stainless steel. A built-in overflow pipe and drain valve simplifies filling of the bath fluid to the proper level. Chemical resistant top plate provides excellent insulation and is easily removed to allow for cleaning of the bath interior. A cooling coil for tap water or refrigerated coolant is provided for operation at near-ambient temperatures. Steel cabinet has leveling feet and a chemical-resistant polyurethane-epoxy finish
 
  Features
 
  • Selectable temperature scale - Fahrenheit or Celsius
  • Automatic timing option for simplified, accurate measurement of efflux times
  • Four tube capacity
  • Dual digital displays show setpoint and actual temperature
  • Microprocessor control of temperature between ambient and 240C (464F)
 
  Testing Standards
 
  • ASTM D88, D244, E102; AASHTO T72; FTM 791-304
 
 

Specifications

  • 115V, 50/60Hz, Single Phase, 12.3A
  • Bath Capacity: 5 gal (19L)
  • Recommended Bath Medium: Water or Suitable Heat Transfer Fluid
  • Temperature Stability: 0.05F ( 0.03C)
  • Temperature Range: Ambient to 464F (240C)
 
 

Included Accessories

  • Tube Nut Wrench
  • Orifice Wrench
  • Port Covers (4)
  • Thermometer Supports (4)
  • Oil Strainer
  • Withdrawal Tube
  • Chained Corks (4)
  • Port Closures (2)
  • Cleaning Plunger
 
 

Home | About Us | Contact Us
Product Index | Terms & Conditions | Shopping Cart

Copyright © 2001-17 QCQA Media, LLC All Rights Reserved.